Address: No. 15 Daqiao Group, Erqiao Village, Wantou Town, Guangling District, Yangzhou City Telephone: 0514-87291926
Contact: Mr. Chen Mobile: 18952519300
1. The spindle stops rotating. This situation is often caused by incorrect parameter setting of the inverter, short circuit of the main axis or data line, and failure of the control card.
2. Engraving dislocation. The path of the engraving software is wrong, the clearance of the lead screw is abnormal, and the fixing screws are loose. The software parameters are incorrect.
3. The milling machine of the engraving machine is uneven. There is a problem with the tool or the main axis is not perpendicular to the table, and the three-axis screw has a problem.
4. The three-axis movement of the engraving machine is abnormal. The corresponding driver has a problem, the stepping motor fails, and the coupling is broken or loose.
The above is the relevant content introduced by Guangling District Yuyang Carving Crafts Factory. If you want to know more about jade carving , please visit our website. We will answer your questions from a professional perspective!